Now that you've got your domain purchased we're going to do a little bit of setup and make sure that
it points to our qubit Nettie's cluster IP the civically at the IP address you can find by going back
to your cougar Nettie's cluster dashboard going to services and then finding the ingress controller
right here.
So that's the IP address that we're going to make use of and we're going to make sure that going to
our domain name that we just purchased is going to point at that IP address.
Now to set this up I'm going to find the DNS settings for the domain that I just purchased.
So click on DNS and then we'll scroll to the bottom of this page.
So I'm going to go down to the bottom and I'll find a custom resource records.
We're going to set up two separate records in total.
The first one is going to make sure that any time that someone goes to my domain name of multi-color
or Keates multi-column they get forwarded to the IP address that is specified right here.
The second rule that I'm going to set up is going to make sure that if someone goes to w w w K-8 stash
multi dot com they go to the same IP address as well.
Remember there is a difference between say w w w Google dot com and just Google dot com.
And we need to make sure that we handle both cases appropriately.
All right.
So under custom resource records I'm going to put a symbol in here like so on then going to make sure
that the A record type is selected.
I'll put in a one hour time to life which is essentially a description of how long it's going to take
for this new record to kick into effect.
And that will enter in an IP address over here the IP address is going to be the IP that was assigned
to your load balancer.
And again you can find this by going to the Google Cloud platform and looking out the services tab.
So my IP address is 3:5 3:58.
Forty seven one we do not need to add on the port at the end we need just the IP address by itself.
So put in the IP like so now we can notice that there is no colon Adian here or anything like that.
It's just the IP address.
Ok so I'm going to add that record and that will create one other record as well.
I'm going to change the type in this dropdown to a See name record.
I'll put in W W W on the left hand side over here.
Well again do a one hour time to live and then for the domain name we're going to make sure there's
someone visits the w w w address.
It's going to send them to Caite's multi dot com.
And of course this will be your particular domain name not mine.
So once we get that in there or then click on Add And that's pretty much it.
We're good to go.
Now you'll notice that on the right hand side there's a little dot on there that got inserted.
That's totally fine.
You can leave it in there.
No issue whatsoever.
All right so we've now set up our domain name and we've pointed it to our IP address that has our load
balancer.
After some amount of time we're going to eventually be able to go to the domain that you just purchased
and be able to access our application.
Now you are going to be able to do that even before we set up all this stuff.
You can access the domain appropriately without going through all the HTP setup but of course you are
still going to see that red arrow not secure message until we go through that setup.
All right.
So let's take a quick pause right here.
We'll come back the next section and we're going to continue with starting to set up our communities
cluster to obtain HTL certificate.
So quick pause and I'll see you in just a minute.